LiSaSWIR 2048
Line-scan array SWIR camera
- Line-scan array
- 2K resolution – 2048x1px @7.5µm pixel pitch
- Linear response mode: High sensitivity
- CameraLink interface
- Bad Pixels Replacement and embedded Non-Uniformity Correction (NUC)
Technical Specification
Sensor | NSC1801T-SI |
Material | InGaAs |
Resolution | 2048x1 |
Pixel pitch | 7.5μm |
Spectral response | 0.9 to 1.7μm |
Dual response | Linear (Low, Medium & High Gain) |
Modes | ITR, ROI |
QE | >85% |
Output | CameraLink |
Frame rate | 60kHz full frame |
Exposure time | 10μs to 220ms |
Read-out noise |
|
Trigger | IN/OUT (LVTTL-Hirose connector) IN through CC1 (CL interface) Selectable delay |
Power Range | 12V |
Dimension | 46x46x65.5mm |
Mount | C-Mount native |
Weight | < 250g |
ADC | 14 bits |
Operating Temp | 0°C to +65°C |
Image example
Image 1. A Silicon Wafer captured by the LiSa SWIR 2048
As Silicon is transparent to Short Wave Infrared wavelength (SWIR), backside wafer inspection can be done (defects detection, pattern alignment, pattern defect inspection, and edge-position bonding inspection)
Image 2. Comparison of Chipset image
Made with Visible Linescan camera (left) vs. the new LiSa SWIR (right)
Thanks to LiSa SWIR, you will be able to inspect through integrated circuit chips for quality inspection. Defects can be easily detected as cracks, voids, particles…
Software
Interface | GUI | SDK |
CameraLink (Embedded) | NITLink | No |
Applications
With its unique performance and features, the LiSaSWIR 2048 is the perfect camera for industrial applications. Its 2048×1 pixels resolution with frame rate of 60kHz, Bad Pixels Replacement, and embedded Non-Uniformity Correction offer a comfortable Field of view for inspection of semiconductor/wafer/solar cell panel or food sorting, hot glass inspection.
CameraLink interface, compact size of 46* 46 * 65.6 mm, lightweight, LiSaSWIR is easy to integrate into any process control system.
- Solar panel inspection/ Semiconductor Inspection
- Process sorting
- Hot Glass inspection